HyracHub
← Parcourir
Inspection, Sampling & Measurement

Inspection, Sampling & Measurement

Mis à jour le 07/10/2026

EN987.0 KB

Gratuit

▶ Commencer à apprendre

Ouvrez-le directement dans votre navigateur — aucune installation requise.

Connectez-vous pour enregistrer votre progression sur tous vos appareils
Obtenir l'applicationL'apprentissage hors ligne se fait dans l'application.

Ce que vous apprendrez

  • Identify and explain the three inspection points: incoming, in-process, and final/output inspection
  • Understand what a hold point is and how an Inspection & Test Plan (ITP) controls quality
  • Explain why sampling is used instead of 100% inspection and describe the AQL concept
  • Identify common measurement tools and explain why calibration is essential
  • Perform a concrete slump test, take concrete cube samples, and check rebar diameter against specifications
  • Measure timber and steel sections against specifications and apply quality checks

À propos

A practical guide for Kenyan TVET learners on construction quality control — covering inspection points, sampling basics, and hands-on measurement techniques.

Ce que contient ce pack· 15 leçons
  1. 1The Three Inspection Points
  2. 2Hold Points & ITP
  3. 3Why We Sample: AQL Basics
  4. 4Measurement Tools & Calibration (1)
  5. 5Measurement Tools & Calibration (2)
  6. 6Worked Examples: Concrete & Rebar (1)
  7. 7Worked Examples: Concrete & Rebar (2)
  8. 8Worked Examples: Concrete & Rebar (3)
  9. 9Worked Examples: Concrete & Rebar (4)
  10. 10Worked Examples: Concrete & Rebar (5)
  11. 11Worked Examples: Concrete & Rebar (6)
  12. 12Worked Example: Timber & Steel Section + Quiz (1)
  13. 13Worked Example: Timber & Steel Section + Quiz (2)
  14. 14Worked Example: Timber & Steel Section + Quiz (3)
  15. 15Reflect: How will you apply what you learned?

Fait partie de ces parcours

Avis

Aucun avis pour l'instant.

Questions & discussion

Connectez-vous pour poser une question ou répondre

Aucune question pour l’instant.